Jattie van der Linde

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Setting Up Octoprint On Linux - Short version ======

<WRAP center round todo 60%>
This section is not completed yet, I am working on this in my spare time and will complete this as soon as possible.
</WRAP>


This page covers the essentials of launching and setting up an Octoprint container image using LXC.

Pass through the usb connections((https://linuxcontainers.org/lxd/docs/master/reference/devices_unix_block/))
<cli>
jattie@hp-linux:~$ lxc config device add octo video0 unix-char source=/dev/video4 path=/dev/video0 required=false gid=44
jattie@hp-linux:~$ lxc config device add octo ttyusb0 unix-char path=/dev/ttyUSB0 gid=20 required=false gid=44
</cli>

<code bash lxc_devices_add.sh>
#!/bin/bash
lxc config device add octo video0 unix-char source=/dev/video4 path=/dev/video0 required=false gid=44
lxc config device add octo ttyusb0 unix-char path=/dev/ttyUSB0 gid=20
</code>
===== Webcam =====

  * mjpg-streamer((https://jamesloper.com/ubuntu-server-install-mjpg-streamer)) ((https://github.com/jacksonliam/mjpg-streamer/blob/master/mjpg-streamer-experimental/plugins/output_http/README.md)) ((https://snapcraft.io/docs/getting-started)) ((https://github.com/john-clark/mjpg-streamer-setup))